Sundyne LMV 801CS Direct Drive Pump

The Sundyne API 610, OH3 with Cartridge Seal API-682 Direct Drive Pump

The Sundyne LMV 801CS (Cartridge Seal) is a self-contained unit consisting of a shaft sleeve, seal and gland plate that fits onto the pump shaft as a single assembly.  The cartridge seal design eliminates many common causes of seal failure and it helps operators overcome the fitting and installation problems associated with conventional seals.

The compact and rugged API 682 cartridge seal is designed specifically for the Sundyne LMV 801, providing operators and maintenance engineers with an economical alternative to standard seal configurations, in a convenient package that eliminates errors in installation.

  • Flows to 380 gpm (86 m³/hr)
  • Heads to 720 ft (220 m)
  • Suction Pressure 875 psi (60 bar)
  • Temperature Range -40 to 550°F (-40 to 288°C)

The vertical configuration of the direct drive line of Sundyne pumps are specifically designed to save valuable space in refineries, NGL production, petrochemical and chemical plants.

APPLICATIONS

  • Feed pumps
  • Booster pumps
  • Bottoms pumps
  • Wash water pumps
  • Reflux pumps
  • Condensate pumps

Proven to be reliable, safe, compact and efficient, Sundyne LMV 801CS pumps provide a number of operational benefits:

  • Single stage, vertical in-line overhung pump according to ISO 13709/API 610 OH3 design recommendations
  • Faster, easier and error-free replacement of pump shaft seals with industry standard cartridge seal
  • Cartridge seals can be installed on any existing LMV 801 without changing piping or wet end components
  • Eliminates premature failures due to improper installation of seals
  • Less downtime for maintenance
  • Increased durability and reliability with cartridge seals
  • Maximized up time
  • Saves space-25% the size of competing horizontal pumps
  • API 610 OH3
  • ATEX certified
  • Continuous operations for 5 years with no overhaul
  • Upgradable to cartridge seal API 682
  • Barske impeller low NPSH technology

US 60 Hz

  • Heads to                                                  720 ft
  • Flows to                                                   380 gpm
  • Standards                                               API 610 OH3
  • Maximum Motor Power                           75 HP
  • Temperature Range                                -40 to 550°F
  • Maximum Allowable Working Pressure       1,440 psi
  • Maximum Suction Pressure                     875 psi
  • Maximum Viscosity                                  750 cp
  • Solids Range                                           0.015″
  • Mounting Configuration                           Vertical
  • Seal Configurations    Single, Double, Tandem-API 682 Cartridge
  • Available Inducer                                       Yes
  • Available Flanges               600#, 900# ANSI RF
  • Suction and Discharge Size                    3″ x 2″
  • API Plans     11, 13, 14, 21, 31, 32, 41, 52, 53, 54, 61, 62

Metric 50 Hz

  • Heads to                                                  153 m
  • Flows to                                                   69 m3/hr
  • Standards                                                API 610, OH3
  • Maximum Motor Power                           55 kW
  • Temperature Range                                -40 to 288°C
  • Maximum Allowable Working Pressure     100 bar
  • Maximum Suction Pressure                     60 bar
  • Maximum Viscosity                                 750 cP
  • Solids Range                                           400 microns
  • Mounting Configuration                           Vertical
  • Seal Configurations   Single, Double, Tandem-API 682 Cartridge
  • Available Inducer                                        Yes
  • Available Flanges                           600#, 900# ANSI RF
  • Suction and Discharge Size                   3″ x 2″
  • API Plans     11, 13, 14, 21, 31, 32, 41, 52, 53, 54, 61, 62

LMV 801CS BUILD CODES

A

E

J

O (1)

W

API 610 BUILD (2)

S-5 (3)

A-7 (4)

S-8 (4)

N/A

S-9 (4)

Pump Case

C.S.

316 SS

C.S.

316 SS

Monel Clad C.S.

Case Studs

B-7

B-7

page6image17158464B-7page6image17159616B-8M

K-Monel

Seal Housing

C.S.

316 SS

page6image17163456C.S.page6image17165184316 SS

Monel

Separator

316 SS

316 SS

316 SS

316 SS

Monel

Diffuser Insert

C.S.

316 SS

page6image17169984316 SSpage6image17105472316 SS

Monel

Diffuser Cover

C.S.

316 SS

page6image17109312316 SSpage6image17111040316 SS

Monel

Impeller

316 SS

316 SS

316 SS

316 SS

Monel

Impeller Bolt

316 SS

316 SS

page6image17116992316 SS316 SS

K-Monel

Inducer

316 SS

316 SS

316 SS

316 SS

Monel

Tab Washer

316 SS

316 SS

316 SS

316 SS

Monel

Shaft Sleeve

316 SS

316 SS

316 SS

17-4 PH

Monel

Throttle Bushing

316 SS

316 SS

page6image16950848316 SSpage6image16952000316 SS

Monel

Metal Seal Parts

316 SS

page6image17267520316 SSpage6image17121024316 SS

316 SS

Monel

Stationary Face

Binderless Carbon or Silicon Carbide

Rotating Face

page6image16962624Tungsten Carbide with Cobalt or Nickel Binder

Shaft (all)

4140 Steel to 0° F, 15-5 from 0° F to –240° F.

O-rings

As Required

  1. “O” build temperature range 0 to -240°F (115°C) Pressure capability is reduced due to strain hardened pump case studs. Contact Application Engineering.
  2. See Sundyne Corporation exceptions/clarifications to API 610, 11th Edition for material requirements of pump parts.
  3. Impeller is upgraded to 316SS. A seal gland is not required because the seals mount in the seal housing. O-rings are used instead of a case gasket.
  4. A seal gland is not required because the seals mount in the seal housing. The pump shaft is AISI 4140 because it is not exposed to the fluid. O-rings are used instead of a case gasket.
  5. Diffuser Inserts and Diffuser Covers apply to model LMV-801 only.

About Sundyne

Sundyne is the world leader in delivering low-flow, high-head, integrally geared centrifugal pumps and compressors, sealless magnetic drive pumps and diaphragm gas compressors. Sundyne’s precision-engineered, highly reliable, safe & efficient pumps and compressors are used in chemical, petrochemical, hydrocarbon, hydrogen, pharmaceutical and industrial applications. Sundyne pumps and compressors are also available in API, ANSI/ASME, ISO, and other industry compliant designs.