Trim Squirt

The job of the trim squirt in a typical paper mill is to cut wet paper to a uniform width before the paper goes throughout the dryer. To operate the trim squirt, a constant source of high-pressure water is required to cut the paper. The media normally used to operate the squirt is white water from the paper machine.  Sundyne's high-pressure centrifugal pumps are often used in this application because of it's small footprint and high reliability.

Pumps for Trim Squirt

  • P-1500

    P-1500

    An industrial grade high-pressure pump with Flows to 33 gpm (7.5 m³/hr) and Heads to 1,300 ft (396 m ...


    P 1500 Industrial Grade Pump
  • P-2500

    P-2500

    An industrial grade, high-pressure pump for general service. Flows to 180gpm (41m³/hr) and Heads to ...


    P 2500 Industrial Grade Pump
  • P-3000

    P-3000

    The P-3000 is an industrial grade pump for general service with Flows to 500gpm (114m³/hr) and Heads ...


    P 3000 Industrial Grade Pump