The P-1500 is a general service non-API pump. Flows to 33 gpm (7.5 m³/hr) and Heads to 1,300 ft (396 m)

 

The P-1500 is a gear driven centrifugal pump.


- Flows to 33 gpm (7.5 m³/hr)
- Heads to 1,300 ft (396 m)


For general industry and non-API services, the P-1500 is built strong to stay up and running.

        

Performance Envelope

P 1500 Performance Envelope 

 

Heads To  100 to 1,300ft 22 to 277m 60HZ: 30 to 396m
Flows To  10 to 33gpm 1 to 6m3/hr 60HZ: 2 to 7m3/hr
Max Power  10 7
Temp Range  -50 to 300°F -46 to 149°C
Number of Stages  1.0
Max Case Working Pressure  1,000 psi 70 kg/cm2
Max Suction Pressure  200 psi (14Kg/cm²)
Standard Delivery  2 Weeks
Speed Range  13,000 to 32,000rpm-60Hz
Materials of Construction  316 Stainless Steel (Duplex Stainless Steel Optional), AISI 4140 / 8620 / 9310 Steel, Aluminum or Cast Steel
Bearing Materials Available Ball Bearings, Riveted Steel, Phenolic, Grease Packed
Hydrotest Pressure  1,080 psig 75 kg/cm2g
Max Viscosity  10 cp
Solids Range  0.015" (0.381mm), 400 microns
Number of Available Hydraulics... 36.0
Seal Configurations Available  Single, Double
Available Inducer  yes
Available Flanges  300# RF
Pump Case Corrosion Allowance  Generous Clearances, No Performance Degradation
Suction and Discharge Size  1" X 1"
Seal Plans for Sunflo Pumps  11, 12, 13, 21, 31, 41, 52, 53

Centrifugal Low Flow Pumps
Sundyne Corporation is the leading expert in Low Flow pumping applications. Sealed or sealless, direct drive or flexibly coupled, our engineering expertise has evolved over the decades to encompass a wide range of products to precisely fit your particular service.

Sunflo medium duty integrally geared pumps perfect for high pressure water
Sunflo integrally geared high-pressure pumps for high pressure water applications

  • Washing Systems
  • Emergency Feedwater
  • Trim Squirt
  • Mine Dewatering
  • Air Pollution
  • Flue Gas Wet Scrubbing
  • Industrial Waste
  • Boiler Feed Booster
  • Feedwater Booster
  • Drainage
  • Filter Backwash
  • Dewatering
  • Boiler Feedwater
  • Snowmaking
  • Condensate
  • Emissions Reduction
  • Mineral Processing
  • Wastewater Treatment
  • Inorganic Chemicals
  • Tank Farm Transfer
  • Seawater Reverse Osmosis SWRO
  • Bioprocessing
  • Concentrator
  • Sulfur Compound Extraction
  • High Pressure Washdown
  • Agriculture
  • Water Cooling
  • Evaporators
  • High Pressure Water Injection
  • Plastics
  • Filtration
  • Industrial Plant Services
  • Steam Generator Feed
  • Water Supply
  • Reverse Osmosis
  • Backwash
  • Pollution Control
  • General Processing Industry
  • Synthetic Fuels
  • Beverage Processing
  • Boiler Circulation
  • Water Pollution
  • Fly Ash
  • Seal Injection
  • Circulation
  • Waste Treatment
  • OEM
  • Felt Wash
  • Membrane Feed
  • Dust Suppression
  • Recycling Services
  • Circulating Water
  • Biofuels
  • Separation
  • Shutdown Cooling
  • Screen Wash
  • Water Boosting
  • Scrubbers
  • Geothermal
  • Essential Service Water
  • Utility
  • Descaling
  • Cement Production
  • Central Cleaning
  • Sugar Processing
  • Heat Recovery Steam Generator
  • Food Processing
  • Condensate Cooling Water
  • Gas Scrubbing
  • Water
  • Water Treatment
  • Water Injection
  • Offshore
  • Auxiliary Feed
  • Biodiesel
  • Energy Recovery
  • Flue Gas Desulphurization
  • Chillers
  • Condenser Cooling
  • Sulfur Sweetening
  • General Purpose
  • Booster
  • Desalination
  • Containment Spray
  • Washdown
  • Boiler Feedwater Systems

Non-Standard for General Industry
Sundyne supplies several non-standard pump designs for applications not requiring specific industry norms

  • Pharmaceuticals
  • General Industry
  • Power Generation
  • Chemical Processing
  • Combined Cycle
  • Refining
  • Utilities
  • Oil and Gas
  • Water Treatment
  • Steam Systems
  • Water Supply and Distribution
  • Conventional Boiler
  • Primary Metals
  • Pulp and Paper
  • Water Resources
  • Auxillary

 

P 1500 Cutaway

P 1500 Dimensions