BMP-338

An ISO 13709, API 610, 10th Edition OH6 pump with Flows to 1,100gpm (250m³/hr) and Heads to 2,800ft (854m)

High Resolution Image

This is a base-mounted gear driven centrifugal pump.

- Flows to 1,100 gpm (250 m³/hr)
- Heads to 2,800 ft (854 m)

The BMP-338 is desinged for heavy-duty services in the HPI, CPI, Gas, and Specialty Processing industries.

Heads To	100 to 2,800ft	22 to 598m	60HZ: 31 to 854m
Flows To	200 to 1,100gpm	8 to 192m3/hr	60HZ: 10 to 240m3/hr
Max Power	350	250
Temp Range	-200 to 650°F	-130 to 340°C
Number of Stages	1.0
Max Case Working Pressure	1,440 psi	103 kg/cm2
Max Suction Pressure	500 psig (36 kg/cm²g)
Differential Head	2,800 ft	853 m
HP Dependent on Diff. Head	250 hp	186 KW
Standard Delivery	14 Weeks
Speed Range	9,545 to 14,729rpm-60Hz
Materials of Construction	Click link for list of materials
Bearing Materials Available	Input Shaft-Ball Bearings, Idler Shaft-Ball Bearing Lower, Journal Upper, High-speed Shaft-Journal
Hydrotest Pressure	1,500 psig	105.5 kg/cm2g
Max Viscosity	750 cp
Industry Standard	API-610
Solids Range	0.015" (0.381mm), 400 microns
Mounting Configurations	Horizontal
Number of Available Hydraulics...	3.0
Seal Configurations Available	Single, Tandem, Double
Available Inducer	Yes
Available Flanges	600# ANSI RF
Pump Case Corrosion Allowance	0.125 in (3.17 mm)
Suction and Discharge Size	4 in X 3 in
API Plans for Sundyne Pumps	11, 12, 13, 21, 23, 31, 32, 41, 52, 53, 54, 61, 62, J

Centrifugal High Head, Low Flow Pumps
Sundyne wrote the book on High-Head, Low-Flow pumps over 50 years ago and everyone else has been playing catch up ever since. Sundyne Pump models are available in single and multi-stage configurations with small, compact footprints.

Sundyne Pumps
Sundyne Heavy Duty Pumps are the definitive word in high-head, low-flow applications

Fuel	Gasification
Condensate Extraction	Flammable Liquids
Heater Charge	Isomerization
Condensate	Crystallizers
Gasoline	Crude Oil Transfer
Inorganic Chemicals	Catalytic Cracking
Tank Farm Transfer	Bioprocessing
Concentrator	Hydrotreating
Light Oils	Water Cooling
Steam Generator Feed	Aromatics
Reactor Feed	Amine Treating
Water Supply	Gas Production
Cargo Loading and Unloading	Synthetic Fuels
Sour Water	Petrochemical Processing
Water Pollution	Catalytic Reforming
Visbreaking	Seal Injection
Reactor Circulation	Hydrocracking
Circulation	Recycling Services
Circulating Water	Biofuels
Separation	High Temperature Service
Water Boosting	Crude Oil Loading
Oil Production	Mixed Liquor
Lubricating Oil	Petroleum Production and Refining
Oxygenates Production	Utility
Cryogenic Service	Diesel Fuel
Alkylation	Heat Recovery Steam Generator
Corrosive Services	Fertilizer
Condensate Cooling Water	Gas Scrubbing
Dehydrogenation	Water
Water Treatment	Water Injection
Offshore	Auxiliary Feed
Biodiesel	Chillers
Condenser Cooling	Organic Chemicals
Propane Transfer

API American Petroleum Institute
Sundyne Corporation has several pump models compliant with American Petroleum Institute API-610, 10th Edition (OH1, OH2, OH5, OH6, BB1, BB2, BB3, VS1, VS2) and API-685 Sealless standards

General Industry	Power Generation
Chemical Processing	Combined Cycle
Refining	Production
Oil and Gas	Water Treatment
Water Supply and Distribution	Conventional Boiler
Water Resources	Auxillary